ढाँचा:Class mask

{{#switch:¬

|प्रमुख लेख
|प्रमुख सूची
|क
|उत्कृष्ट लेख
|ग        = 
|ख       = ख
|सुरूवात|सुरुवात = सुरुवात
|अपुरो
|सूची     = 
|अज्ञात      = अज्ञात
|चित्र
|चित्र = अज्ञात
|श्रेणी
|श्रेणी = अज्ञात
|अस्पष्ट
|अस्पष्ट= अज्ञात
|पोर्टल   = अज्ञात
|अनुप्रेषण = अज्ञात
|ढाँचा
|ढाँचा = अज्ञात
|परियोजना  = अज्ञात
|मस्यौदा    = अज्ञात
|प्रमुख चित्र       = अज्ञात
|¬        = ¬
|#default = {{#if:{{{|}}}
 |{{{|}}}
 |अज्ञात
}}

}}

ढाँचा कागजात[हेर्नुहोस्] [सम्पादन गर्नुहोस्] [इतिहास] [ताजा गर्नुहोस्]

This template is designed for use in WikiProject banners, and provides an easy way to construct a bespoke class mask. The class parameter must be passed to the template as the first unnamed parameter.

Implementation in Template:WPBannerMeta

The template provides the default class masks for WikiProject's quality scales, and is also used by the majority of projects which use a custom class mask. It can be used in two different ways, either

• the subpage method, with WPBannerMeta set to |QUALITY_SCALE=subpage in the WikiProject's banner template and {{Class mask}} called from its /class subpage. In this case, specific guidance on how the template works with the chosen parameters is displayed on this page.

or

• the inline method, where WPBannerMeta is configured with |QUALITY_SCALE=inline and {{Class mask}} is called directly as the value of its |class= parameter.

Subpage method

When used on a /class subpage (with |QUALITY_SCALE=subpage supplied to WPBannerMeta on the root banner template page), the template should be called in the following way:

{{Class mask<noinclude>/templatepage</noinclude>|1={{{class|}}}
 |topic=
 |all other optional parameters desired, one per line…
}}

The <noinclude>...</noinclude> tags allow the documentation from {{Class mask/templatepage}} to be displayed directly on the banner template's /class subpage, where it can provide useful information and category prompts for WikiProject admins and other interested users without any adverse effects to the banner template.

• the |topic= parameter defines the main naming scheme of the assessment categories used by the project (i.e. the part of its assessment category names that comes after Category:Whatever-Class and before articles) and is used to check the existence of the categories that are required. For example, if your project uses categories such as Category:B-Class mathematics articles, etc., then set |topic=mathematics.
  • if the template uses task forces, the parameters |topic1=, |topic2=, |topic3=, |topic4=, |topic5= and |topic6= can be used to check for the corresponding categories needed by each.

Neither of the above are required for the inline method below.

Inline method

When used "inline" (e.g. with |QUALITY_SCALE=inline), the call to /templatepage insides the <noinclude>...</noinclude> tags and the |topic= parameter(s) are not used, and the template should be called in the following way:

{{Class mask |1={{{class|}}} |optional parameters}}

Bear in mind that if the banner uses any hooks (e.g. the taskforce hook), you will need to insert the call to {{Class mask}} with the appropriate options each time is supposed to be used as the value of a parameter. Therefore, the subpage method may be more expedient in these cases.

Optional parameters

• If one or more of these nine is set to no, the class will be switched off. Their default is yes:
  • |fa= – Featured Article
  • |fl= – Featured List
  • |a= – A-Class
  • |ga= – Good Article
  • |b= – B-Class
  • |c= – C-Class
  • |start= – Start-Class
  • |stub= – Stub-Class
  • |list= – List-Class
• |FQS= – if set to yes, these seven additional assessment classes are activated (FQS stands for Full Quality Scale). Undesired classes may then be switched off individually by setting them to no. When |FQS= is absent, setting one or more to yes will switch on only that class.
  • |category= – Category-Class
  • |disambig= – Disambig-Class
  • |draft= – Draft-Class
  • |file= – File-Class
  • |portal= – Portal-Class
  • |project= – Project-Class
  • |template= – Template-Class
• If either of these is set to yes, that class will be switched on. The default is no, regardless of the |FQS= setting:
  • |fm= – Featured Media
  • |redirect= – Redirect-Class
• |forceNA= - if set to yes, will automatically classify pages tagged as |class=NA depending on the namespace of the page. The default setting is no.
• |b1=, |b2=, |b3=, |b4=, |b5=, |b6= - if the B-class checklist is used, these parameters must be passed through.

The lowercase parameter syntax

Add a class in lowercase as the name of a parameter followed by the value "yes". For example, |future=yes would add the

भविष्य

class. This is the simplest way of adding a class but has the following two limitations:

• The name of the class must have an initial capital letter and all following letters in lowercase. In other words, the capitalisation must be of the form Xxxxxx.
• It is not possible to use this method to add a shortcut or alternative alias for a different class, for example "Cur" for Current-class.

If either of these are required, the uppercase parameter syntax must be used (see below).

If |FQS=yes is used, then a value of "no" may be used to switch off that individual class. Thus, on a /class subpage:

{{Class mask<noinclude>/templatepage</noinclude>|1={{{class|}}}
 |topic=physics
 |FQS=yes
 |portal=no
}}

would support six of the seven additional classes listed above but not support Portal-Class.

The UPPERCASE parameter syntax

Add a class in UPPERCASE as the name of a parameter followed by the exact, case-sensitive name of the class as the value of the parameter. For example,

|SIA=SIA

would add SIA-Class and

|CHEESECAKE=CheeseCake

would add CheeseCake-Class.

You can use this method to add a shortcut or alias for a class, too, as in the case of

|future=yes
|FUT=Future

which would have the effect that defining either |future= or |fut= (not case sensitive) with a valid value would result in an assessment into Future-Class for that page.

You can add as many aliases for a class as needed, so this would work just as well for SIA-Class,

|SIA=SIA
|SETINDEX=SIA
|SET INDEX ARTICLE=SIA

and would mean that an input of |sia=, |setindex= or |set index article= (again, these are case-insensitive) would each result in an SIA-Class page assessment.

Examples

Example 1: subpage

The following code is placed in the banner template,

|QUALITY_SCALE=subpage
 |class={{{class|}}}

and on the /class subpage (for example {{WikiProject Zimbabwe}} uses the subpage Template:WikiProject Zimbabwe/class), the following code is used:

{{Class mask<noinclude>/templatepage</noinclude>|1={{{class|}}}
 |topic=Zimbabwe
 |FQS=yes
 |redirect=yes
}}

In this case all seven of the "extended" quality classes are used, plus the additional Redirect-Class, and because the |topic= parameter is set, specific documentation will be displayed on the /class subpage for it.

Example 2: inline

The following code is placed in the banner template,

|QUALITY_SCALE=inline
 |class={{Class mask |1={{{class|}}} |FQS=yes |redirect=yes |fm=yes}}

activating all seven extended quality classes, plus the additional Redirect- and FM- classes.

Subtemplates

• {{Class mask/b}} - the mask for B-checklist parameters
• {{Class mask/sandbox}} - the template sandbox, used for experimentation
• {{Class mask/templatepage}} - the documentation that is displayed on /class subpages
  • {{Class mask/templatepage/row}} - used by /templatepage
• {{Class mask/doc}} - the documentation you are reading now
  • {{Class mask/doc/custom}} - for information on building your own class mask

Instances

• This shows all /class subpages which use this template.

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Class mask in articles based on its TemplateData.

TemplateData for Class mask

This template provides the project-specific valid Wikipedia 1.0 assessment scheme classes to Template:WPBannerMeta

ढाँचा प्यारामिटरहरू[ढाँचा डाटा सम्पादन गर्नुहोस्]

This template prefers inline formatting of parameters.

मापदण्ड		विवरण	प्रकार	स्थिति
Assessment class	1	Passthrough for {{{class}}} parameter from Template:WPBannerMeta प्रस्तावित मानहरू {{{class|}}} उदाहरण {{{class|}}} स्वत: मूल्य {{{class|}}}	सामग्री	आवश्यक
topic	topic	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
fa	fa	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
fl	fl	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
a	a	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
ga	ga	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
b	b	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
c	c	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
start	start	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
stub	stub	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
list	list	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
FQS	FQS	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
category	category	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
disambig	disambig	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
draft	draft	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
file	file	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
portal	portal	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
project	project	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
template	template	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
fm	fm	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
redirect	redirect	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
forceNA	forceNA	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
b1	b1	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
b2	b2	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
b3	b3	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
b4	b4	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
b5	b5	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
b6	b6	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
topic1	topic1	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
topic2	topic2	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
topic3	topic3	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
topic4	topic4	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
topic5	topic5	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक
topic6	topic6	कुनैपनि विवरण छैन	अज्ञात	वैकल्पिक

माथिको कागजात ढाँचा:Class mask/कागजातबाट समावेश गरिएको छ। (सम्पादन गर्नुहोस् | इतिहास)
सम्पादकहरूले यस ढाँचाको प्रयोगस्थल (सिर्जना गर्नुहोस् | नक्कल गर्नुहोस्) र परीक्षण (सिर्जना गर्नुहोस्) पृष्ठहरूमा प्रयोग गर्न सक्छन्।
/कागजात उपपृष्ठमा श्रेणीहरू थप्नुहोस्। यस ढाँचाका उपपृष्ठहरू।