ढाँचा:Convert

ढाँचा कागजात[हेर्नुहोस्] [सम्पादन गर्नुहोस्] [इतिहास] [ताजा गर्नुहोस्]

यहाँले, currency conversionको लागि, Template:To USD र Template:To EUR हेर्नुहोस्।

Template {{convert}} calculates a measurement value (number × unit) into the same measurement by a different unit, and then presents the results, formatted. See also the unit symbols recognized by this template.

For example:

{{convert|2|km|mi}} → २ किलोमिटर (१.२ माइल) (km entered, converted into miles)

{{convert|7|mi|km}} → ७ माइल (११ किमी) (mi entered, converted into km)

Numbers can be rounded, units can be abbreviated into symbols:

{{convert|2|km|mi|2|abbr=on}} → २ किमी (१.२४ माइल)

{{convert|7|mi|km|2|abbr=on}} → ७ माइल (११.२७ किमी)

Value ranges can be entered using |to|... or |-|...:

{{convert|2|to|5|km|mi}} → २ to ५ किलोमिटर (१.२ to ३.१ माइल)

{{convert|2|-|5|km|mi}} → २–५ किलोमिटर (१.२–३.१ माइल)

Combined effect example:

{{convert|2|-|5|km|mi|2|abbr=on}} → २–५ किमी (१.२४–३.११ माइल)

{{convert|2|and|5|km|mi|sigfig=3|abbr=off}} → २ and ५ किलोमिटर (१.२४ and ३.११ माइल)

See Help:Convert for more detailed, technical information

Units to convert

See also: the summary at Complete list of units for {{Convert}} and the complete list at Module:Convert/documentation/conversion data

Enter units to convert from into:

• {{convert|1|lb|kg}} → १ पाउन्ड (०.४५ किग्रा)

SI units generally accept prefixes, like "m" for milli (10⁻³), and "M" for mega (10⁶)

For "per" units, use "/" (slash): kg/ha (see § 'per' units: kg/ha and § Currency per unit: $/km)

For three-unit units, etc., see श्रेणी:Convert-like templates

Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first quantity shows the unit name, the second shows the symbol (or abbreviation):

• {{convert|1|lb|kg}} → १ पाउन्ड (०.४५ किग्रा)

Using |abbr=in shows the symbol for first (left-hand side) unit, and the name instead of the symbol for the second unit:

• {{convert|1|lb|kg|abbr=in}} → १ पाउन्ड (०.४५ किलोग्राम)

To abbreviate both or neither:

• {{convert|1|lb|kg|abbr=on}} → १ पाउन्ड (०.४५ किग्रा)
• {{convert|1|lb|kg|abbr=off}} → १ पाउन्ड (०.४५ किलोग्राम)

Convenience: {{cvt}} has |abbr=on by default

Template {{cvt}} is the same as {{convert}}, except that it has |abbr=on as the default behavior. In {{cvt}}, all other options are available. So:

{{cvt|1|lb|kg}} → १ पाउन्ड (०.४५ किग्रा)

is equivalent to:

{{convert|1|lb|kg|abbr=on}} → १ पाउन्ड (०.४५ किग्रा)

Adjective: a 10-mile distance

Use |adj=on to produce the adjectival (hyphenated) form:

• A {{convert|10|mi|km|adj=on}} distance → A १०-माइल (१६ किमी) distance.

Default behavior, for comparison:

• {{convert|10|mi|km}} to go → १० माइल (१६ किमी) to go.

|adj=on does not produce hyphens with unit symbols, as per :

• A {{convert|9|in|cm|adj=on|abbr=on}} nail → A ९ इन्च (२३ सेमी) nail.

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

See Help:Convert § Rounding for a more mathematical description of the rounding options

By definition, 100 ft equals ३०.४८ मी. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding

By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant digits, whichever is more precise. An exception to this is rounding temperatures (see below).

Convert supports four types of rounding:

Round to a given precision: use a precision number

Specify the desired precision with an integer as the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of ​¹⁄₁₀ to the power of this integer. For instance, if the result is 8621 and the rounding parameter is "−2", 8600 will be displayed. If the result is "123.456" and the parameter is "0", 123 will be displayed. Essentially a positive or zero rounding parameter specifies the number of decimal places; a negative value specifies the number of trailing zeroes.

Examples of rounding
Input	Displays as	Note
{{convert|123|ft|m|-1}}	१२३ फिट (४० मी)
{{convert|123|ft|m}}	१२३ फिट (३७ मी)	same output as with 0 (below)
{{convert|123|ft|m|0}}	१२३ फिट (३७ मी)
{{convert|123|ft|m|1}}	१२३ फिट (३७.५ मी)
{{convert|123|ft|m|2}}	१२३ फिट (३७.४९ मी)	123 feet is exactly 37.4904 m which is rounded to 37 m if this parameter is not specified at all
{{convert|500|ft|m|-1}}	५०० फिट (१५० मी)
{{convert|500|ft|m}}	५०० फिट (१५० मी)	same output as with -1 (above), because the conversion factor is between 0.2 and 2 (hence, it should produce same double-zero precision (−2) as in the input value), but the conversion must produce two significant digits at a minimum (hence, a higher single-zero precision (−1) is used)
{{convert|500|ft|m|0}}	५०० फिट (१५२ मी)
{{convert|500|ft|m|1}}	५०० फिट (१५२.४ मी)
{{convert|500|ft|m|2}}	५०० फिट (१५२.४० मी)	exact value is 152.4 m
{{convert|500|ft|cm|-3}}	५०० फिट (१५,००० सेमी)
{{convert|500|ft|cm}}	५०० फिट (१५,००० सेमी)	same output as with -3 (above), because the conversion factor is between 20 and 200 (hence, it should decrease input value's double-zero precision (−2) by 2), but the conversion must produce two significant digits at a minimum (hence, a higher triple-zero precision (−3) is used)
{{convert|500|ft|cm|0}}	५०० फिट (१५,२४० सेमी)

Round to a given number of significant figures: |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

• {{convert|1200|ft|m|sigfig=4}} → १,२०० फिट (३६५.८ मी)
• {{convert|1200|ft|m|sigfig=3}} → १,२०० फिट (३६६ मी)
• {{convert|1200|ft|m|sigfig=2}} → १,२०० फिट (३७० मी)
• {{convert|1200|ft|m|sigfig=1}} → १,२०० फिट (४०० मी)

Default behavior, for comparison:

• {{convert|1200|ft|m}} → १,२०० फिट (३७० मी)

Setting |sigfig= to a value less than 1 is meaningless:

• {{convert|1200|ft|m|sigfig=0}} → १,२०० फिट (३७० मी) N

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

• {{convert|10|m|ft}} → १० मिटर (३३ फिट)
• {{convert|10|m|ft|round=5}} → १० मिटर (३५ फिट)

Similar: using |round=25 rounds the outcome to a multiple of 25.

• {{convert|10|m|ft}} → १० मिटर (३३ फिट)
• {{convert|10|m|ft|round=25}} → १० मिटर (२५ फिट)

Default behavior, for comparison:

• {{convert|10|m|ft|sigfig=4}} → १० मिटर (३२.८१ फिट)

In a range, one can round each value individually to the default. Use |round=each:

• {{convert|10 x 200 x 3000|m|ft}} → १० by २०० by ३,००० मिटर (३३ फिट × ६५६ फिट × ९,८४३ फिट)
• {{convert|10 x 200 x 3000|m|ft|round=each}} → १० by २०० by ३,००० मिटर (३३ फिट × ६६० फिट × ९,८०० फिट)

Round to a multiple of a given fraction: ​2 ³⁄₁₆ inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in ​¹⁄₃).

• {{convert|5.56|cm|in|frac=16}} → ५.५६ सेन्टिमिटर (२+३⁄१६ इन्च)
• {{convert|8|cm|in|frac=4}} → ८ सेन्टिमिटर (३+१⁄४ इन्च)

The fraction is reduced when possible:

• {{convert|8|cm|in|frac=100}} → ८ सेन्टिमिटर (३+३⁄२० इन्च)

Default behavior uses decimal notation:

• {{convert|5.56|cm|in}} → ५.५६ सेन्टिमिटर (२.१९ इन्च)

Rounding temperatures: °C, °F and K

In temperatures, the conversion will be rounded either to the precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

1. {{convert|10,000|C|F K}} → १०,००० °से (१८,००० °फे; १०,३०० के)
2. {{convert|10,000.1|C|F K}} → १०,०००.१ °से (१८,०३२.२ °फे; १०,२७३.२ के)
3. {{convert|-272|C|F K}} → −२७२ °से (−४५७.६० °फे; १.१५ के)
4. {{convert|-272|C}} → −२७२ °से (−४५७.६० °फे)
5. {{convert|100|C|F K}} → १०० °से (२१२ °फे; ३७३ के)
6. {{convert|0|C|F K}} → ० °से (३२ °फे; २७३ के)

The precision of the input number in example (1) is one digit, but the precision of its kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a ०.१ डिग्री सेल्सियस परिवर्तन is a ०.१८ डिग्री फेरनहाइट परिवर्तन, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert|10000|C|sigfig=5}} → १०,००० °से (१८,०३२ °फे)

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert|10000|C|0}} → १०,००० °से (१८,०३२ °फे)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is six now, whereas before kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the kelvins conversion generated the fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the kelvins conversion.

Rounding input

There is limited support for rounding the displayed input number. The rounding takes place after conversion, so the output is based on the full-precision input. This is useful when the input is produced by {{#expr:}} or otherwise available to a higher precision than is usefully displayed, and it's desirable to avoid double-rounding.

To round the input to a specified number of digits after the decimal point, use one of the parameters:

• |adj=ri0
• |adj=ri1
• |adj=ri2
• |adj=ri3

Note that it is not possible to round above the decimal place (|adj=ri-1N is invalid). Neither is there support for significant figures, multiples of a number, or any other output-rounding feature.

The default precision is computed based on the input, so an explicit output precision must usually be supplied:

• {{convert|4.14159|mi|km|adj=ri0}} → ४ माइल (६.६६५२४ किमी) N (precisions are mismatched)
• {{convert|4.14159|mi|km|0|adj=ri0}} → ४ माइल (७ किमी) Y

In this case, if the input were rounded before conversion, a different result would be obtained:

• {{convert|{{#expr:4.14159 round 0}}|mi|km|0}} → ४ माइल (६ किमी) N (rounds intermediate calculation, giving a different result)

Into multiple units: १० °से (५० °फे; २८३ के)

Separate the multiple output units by a space:

• {{convert|10|C|F K}} → १० °से (५० °फे; २८३ के)
• {{convert|5|km|mi nmi}} → ५ किलोमिटर (३.१ माइल; २.७ समुद्री माइल)

If the output unit names contain spaces, use + as the separator.

See also:

• For multiple-unit options like 1 ft 5 in, see § In input and § In output.

Ranges of values

यहाँले, a conversion of a differenceको लागि, § Units of difference हेर्नुहोस्।

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:
ढाँचा:Convert/doc/range separator list

Multiple dimensions: ६ मी × १२ मी (२० फिट × ३९ फिट)

Use by:

• {{convert|6|by|12|ft|m}} → ६ by १२ फिट (१.८ by ३.७ मी)

Use ×, multiplication sign, or x, letter:

• {{convert|6|x|12|m|ft}} → ६ by १२ मिटर (२० फिट × ३९ फिट)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

• {{convert|6|x|12|m|ft|abbr=on}} → ६ मी × १२ मी (२० फिट × ३९ फिट)

Lists of values: 20, 40, or 60 miles

{{convert|20|,|40|, or|60|mi}} → २०, ४०, or ६० माइल (३२, ६४, or ९७ किमी)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

• {{convert|1|ft|3|in|x|3|ft|5|in|mm}} → १ फिट ३ इन्च () N

Default behavior, for comparison:

• {{convert|1|ft|3|in|mm}} → १ फिट ३ इन्च (३८० मिमी)

However, converting metric units into feet and inches with |order=flip can produce the desired output:

• {{convert|380|x|1040|mm|ftin|order=flip}} → १ फिट ३ इन्च by ३ फिट ५ इन्च (३८० मिमी × १,०४० मिमी)

Words

Spelling of unit name: international metre or US meter?

Default spelling of units is in the en (generic) locale. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → १ मिटर (३.३ फिट)—default

{{convert|1|m|ft|sp=us}} → १ मिटर (३.३ फिट)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

• {{convert|10|mi|m|spell=in}} → दस माइल (१६,००० मी)

To spell out both in and out values, use |spell=on:

• {{convert|10|mi|m|spell=on}} → दस माइल (सोह्र thousand मिटर)

To make the first letter a capital, use |spell=In, |spell=On

• {{convert|10|mi|m|spell=In}} → दस माइल (१६,००० मी)
• {{convert|10|mi|m|spell=On}} → दस माइल (सोह्र thousand मिटर)

Inserted before units: 4 planted acres

• {{convert|4|acre||adj=pre|planted}} → ४ planted एकड (१.६ हेक्टर)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

• {{convert|4|acre||disp=preunit|planted }} → ४ planted एकड (१.६ planted हेक्टर)
• {{convert|4|acre||disp=preunit|planted |reforested-}} → ४ planted एकड (१.६ reforested-हेक्टर)

After adjective unit: A १०-फिट-long corridor

Note that two units (in this case, ft and m) are required. Use with just one unit will generate an error message.

{{convert|10|ft|m|adj=mid|-long}} → १०-फिट-long (३.० मी)

Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

• {{convert|1|metre}} → १ मिटर (३ फिट ३ इन्च)
• {{convert|2|metre}} → २ मिटर (६ फिट ७ इन्च)
• {{convert|2|metre|abbr=on}} → २ मी (६ फिट ७ इन्च)

Exception

Entering the unit "foot" instead of "ft" forces singular output "foot", whatever the number is.

• {{convert|100|foot|abbr=off}} → १०० फिट (३० मिटर)

Fractions: one-eighth of an imperial pint

The convert template also supports spelling out fractions.

• {{convert|3+1/2|oz|g|spell=in}} → तीन and a half औंस (९९ ग्रा)

Any additional words needed for the fraction can also be added at the end of the template.

• {{convert|1/8|imppt|ml|spell=in|adj=pre|of an}} → one-eighth of an imperial pint (७१ mलि)

Wrapping and line breaking

See Help:Convert § Wrapping and line breaking

Spelling out "thousands", "millions", etc.

Most unit codes accept a prefix of e3 (thousand) or e6 (million) or e9 (billion).

• {{convert|100|e6mi|e6km}} → १०० million माइल (१६०×१०^^६ किमी)
• {{convert|120|e6acre}} → १२० million एकड (४,९०,००० किमी^२)
• {{convert|120|e6acre|e3km2}} → १२० million एकड (४९०×१०^^३ किमी^२)

To display both input and output in scientific notation, use |abbr=on

• {{convert|100|e6mi|e6km|abbr=on}} → १००×१०^^६ माइल (१६०×१०^^६ किमी)

To spell out "thousands", "millions", etc., |abbr=unit abbreviates the unit; |abbr=off displays both full unit names.

• {{convert|100|e6mi|e6km|abbr=unit}} → १०० million माइल (१६० million किमी)
• {{convert|100|e6mi|e6km|abbr=off}} → १०० million माइल (१६० million किलोमिटर)

Numbers

Using an SI prefix: gigametre (Gm), or micrometre (μm)

Metric prefixes

Text	Symbol	Factor
quetta	Q	1030
ronna	R	1027
yotta	Y	1024
zetta	Z	1021
exa	E	1018
peta	P	1015
tera	T	1012
giga	G	109
mega	M	106
kilo	k	103
hecto	h	102
deca	da	101
(none)		1
deci	d	10−1
centi	c	10−2
milli	m	10−3
micro	μ	10−6
nano	n	10−9
pico	p	10−12
femto	f	10−15
atto	a	10−18
zepto	z	10−21
yocto	y	10−24
ronto	r	10−27
quecto	q	10−30

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigametre. These are plain multiplication factors.

To illustrate, these are trivial calculations (from metre to metre), showing the multiplication factor:

• १२ Gमी (१.२×१०^१० मी)
• १२ μमी (१.२×१०^−५ मी)

The prefix can be added before the SI unit (here: unit m for metre):

• {{convert|12|Gm|mi|abbr=on}} → १२ Gमी (७५,००,००० माइल)
• Mm: १२ Mमी (७,५०० माइल)
• km: १२ किमी (३९,००० फिट)
• mm: १२ मिमी (०.४७ इन्च)
• μm: १२ μमी (०.०१२ मिमी)
• um: १२ μमी (०.०१२ मिमी) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

• {{convert|12000|mi|Mm|abbr=on}} → १२,००० माइल (१९ Mमी)
• {{convert|12|in|μm|abbr=on}} → १२ इन्च (३,००,००० μमी)

As an exception, the non-SI unit "inch" can have the "μ" prefix too:

• {{convert|12|μm|μin|abbr=on}} → १२ μमी (४७० µin)

थप जानकारी: Help:Convert units § SI prefixes

Engineering notation: 7 million km

Engineering notation can be entered with a prefix to the unit:

• {{convert|70|e6m}} → ७० million मिटर (२३,००,००,००० फिट)
• {{convert|70|e6m|abbr=on}} → ७०×१०^^६ मी (२३,००,००,००० फिट)

The same is possible for the output unit:

• {{convert|230,000,000|ft|e6m}} → २३,००,००,००० फिट (७०×१०^^६ मी)

The prefixes are:

• e3 (thousand)
• e6 (million)
• e9 (billion)
• e12 (trillion)
• e15 (quadrillion)

Engineering notation may use "e" or "E", for example, e3km or E3km. Using uppercase E3km displays the factor as a word ("thousand") rather than as ×10³. Using lowercase e3km displays the word if abbr=unit is used, or if abbr=off applies to the unit.

• {{convert|70|e6m|e6ft}} → ७० million मिटर (२३०×१०^^६ फिट)
• {{convert|70|e6m|e6ft|abbr=off}} → ७० million मिटर (२३० million फिट)
• {{convert|70|e6m|e6ft|abbr=unit}} → ७० million मी (२३० million फिट)
• {{convert|70|E6m|e6ft|abbr=in}} → ७० million मी (२३० million फिट)

Scientific notation: 1.23 × 10⁻¹⁴

In scientific notation, a number is written like १.२३१४. The plain number has exactly one digit before the decimal point.

With {{convert}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

• {{convert|12.3e-15|atm|atm|abbr=on}} → १२.३×१०^−१५ atm (१.२३×१०^−१४ atm)
• {{convert|0.00000005|atm|atm|abbr=on}} → ०.०००००००५ atm (५.०×१०^−८ atm)

Input with fractions: १+१⁄२ इन्च (३८.१ मिमी)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

• {{convert|1/2|in|mm|1}} → १⁄२ इन्च (१२.७ मिमी)
• {{convert|1⁄2|in|mm|1}} → १⁄२ इन्च (१२.७ मिमी)

With positive mixed numbers (a positive integer and a fraction), use a + sign

• {{convert|2+1⁄2|in|mm|1}} → २+१⁄२ इन्च (६३.५ मिमी)

With negative mixed numbers, use a hyphen - and repeat it:

• {{convert|-2-1⁄2|in|mm|1}} → −२+१⁄२ इन्च (−६३.५ मिमी)

Note that the following cases are not interpreted as mixed numbers:

• {{convert|2-1⁄2|in|mm|1}} → २–१⁄२ इन्च (५०.८–१२.७ मिमी). This is interpreted as a range from 2 inches to 1⁄2 inch.
• {{convert|-2+1⁄2|in|mm|1}} → N This is neither a mixed number nor a range, and mathematical expressions requiring calculations are not allowed here.
• {{convert|2+½|in|mm|1}} → N Fractions consisting of a single Unicode character are not allowed either.

Horizontal fraction bar: ⁠११/२⁠ inch

Using a double slash (//) provides a horizontal fraction bar for the original (input) unit:

• {{convert|1//2|in|mm|1}} → १/२ इन्च (१२.७ मिमी)
• {{convert|6+3//8|in|mm|1}} → ६+३/८ इन्च (१६१.९ मिमी)

Using a negative value for |frac= provides a horizontal fraction bar for the converted (output) unit:

• {{convert|12.7|mm|frac=-2}} → १२.७ मिलिमिटर (१/२ इन्च)
• {{convert|161.9|mm|frac=-8}} → १६१.९ मिलिमिटर (६+३/८ इन्च)

Thousands separator: 1,000 mi or 1000 mi

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

• {{convert|1234567|m|ft}} → १२,३४,५६७ मिटर (४०,५०,४१७ फिट)
• {{convert|1,234,567|m|ft}} → १२,३४,५६७ मिटर (४०,५०,४१७ फिट)

Set |comma=off to remove the separator from the output:

• {{convert|1234567|m|ft|comma=off}} → १२३४५६७ मिटर (४०५०४१७ फिट)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

• {{convert|1234567|m|ft|comma=gaps}} → १२३४५६७ मिटर (४०५०४१७ फिट)

Default behavior, for comparison:

• {{convert|1234567|m|ft}} → १२,३४,५६७ मिटर (४०,५०,४१७ फिट)

Setting |comma=5 will only add the separator when the number of digits is 5 or more:

• {{convert|1234|m|ft|comma=5}} → १२३४ मिटर (४०४९ फिट)
• {{convert|1234567|m|ft|comma=5}} → १२,३४,५६७ मिटर (४०,५०,४१७ फिट)

Default behavior, for comparison:

• {{convert|1234|m|ft}} → १,२३४ मिटर (४,०४९ फिट)

Output manipulation

Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, semicolon, or, br, br(), x|…:

• {{convert|10|m|ft|disp=sqbr}} → १० मिटर [३३ फिट]
• {{convert|10|m|ft|disp=comma}} → १० मिटर, ३३ फिट
• {{convert|10|m|ft|disp=semicolon}} → १० मिटर; ३३ फिट
• {{convert|10|m|ft|disp=or}} → १० मिटर or ३३ फिट

Default behavior, for comparison:

• {{convert|10|m|ft}} → १० मिटर (३३ फिट)

Setting |disp=br will force a new line (<br/>)

• {{convert|10|m|ft|disp=br}} → १० मिटर
  ३३ फिट

Also |disp=br() will force a new line, and keep the brackets (useful in tables):

• {{convert|10|m|ft|disp=br()}} → १० मिटर
  (३३ फिट)

Setting |disp=x|… allows any text as separator:

• {{convert|10|m|ft|disp=x|_MyText_}} → १० मिटर_MyText_३३ फिट (To display spaces, use  )

Flipping (reordering) the two measurements: १,६०९.३ मिटर (१ माइल)

Setting |order=flip will flip (swap) the two measurements:

• {{convert|1|mi|m|order=flip}} → १,६०९.३ मिटर (१ माइल)

Default behavior, for comparison:

• {{convert|1|mi|m}} → १ माइल (१,६०९.३ मिटर)

When converting to multiple units, the effect is:

• {{convert|10|km|mi nmi|order=flip}} → ६.२१३७ माइल; ५.३९९६ समुद्री माइल (१० किलोमिटर)
• {{convert|10|km|nmi mi|order=flip}} → ५.३९९६ समुद्री माइल; ६.२१३७ माइल (१० किलोमिटर)

Fixed ordering of output units: २१२ °फे (१०० °से; ३७३ के)

Setting |order=out shows the output-units as ordered; the input unit is skipped:

• {{convert|100|C|F C K|abbr=on|order=out}} → २१२ °फे (१०० °से; ३७३ के)
• {{convert|200|PS|kW hp|0|abbr=on|order=out}} → १४७ kवॉट (१९७ अश्वशक्ति)

See also: § Displaying parts of the output.

Displaying parts of the result: २ (१.५)

It is possible to display only parts of the conversion result: The following examples show how to display only a part of the result.

Note: in Convert, abbr is synonym for unit symbol

Convert	Returns	Components
{{convert|2|cuyd|m3}}	२ घन गज (१.५ मी3)	all (default conversion)
{{convert|2|cuyd|m3|abbr=on}}	२ घन गज (१.५ मी3)	all (default conversion, abbr)
{{convert|2|cuyd|m3ढाँचा:Bg}}	२ (१.५)	numbers only
{{convert|2|cuydढाँचा:Bg}}	२.० घन गज	input value (workaround)
{{convert|2|cuydढाँचा:Bg}}	२.० घन गज	input value abbr (workaround)
{{convert|2|cuyd|m3ढाँचा:Bg}}	घन गज	input unit
{{convert|2|cuyd|m3ढाँचा:Bg}}	घन-गज	input unit, adjectival (hyphenated)
{{convert|2|cuyd|m3ढाँचा:Bg}}	घन गज	input unit, adjectival (abbr so not hyphenated)
{{convert|2|cuyd|m3ढाँचा:Bg}}	घन गज	input unit abbr
{{convert|2|cuyd|m3ढाँचा:Bg}}	१.५ मी3	output value, symbols
{{convert|2|cuyd|m3ढाँचा:Bg}}	१.५ घन मिटर	output value, names
{{convert|2|cuyd|m3ढाँचा:Bg}}	१.५-घन-मिटर	output, adjective
{{convert|2|cuyd|m3ढाँचा:Bg}}	१.५	output number
{{convert|2|cuyd|m3ढाँचा:Bg}}	मी3	output unit (abbr by default)
{{convert|2|cuyd|m3ढाँचा:Bg}}	घन मिटर	output unit (name)
{{convert|2|cuyd|m3ढाँचा:Bg}}	मी3	output unit (abbr)

Display both input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

• {{convert|2|kPa|psi|abbr=~}} → २ kiloपास्कल [kपास्कल] (०.२९ पाउन्ड/वर्ग इन्च)
• A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure → A २-kiloपास्कल [kपास्कल] (०.२९ पाउन्ड/वर्ग इन्च) pressure

Table options

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Enforced line break

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br	|disp=br()
१०० किलोमिटर ६२ माइल	१०० किलोमिटर (६२ माइल)

Table columns

Using {convert} in a table cell, with |disp=table splits the result over two (or more) columns. By default units are not included in the table, however, they can be added using the |abbr= parameter. Multiple-unit outputs, like ftin, always output their units to the table.

{{convert|10|m|ft|disp=table}} →

style="text-align:right;"|१० |style="text-align:right;"|३३

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}} →

style="text-align:center;"|२० |style="text-align:center;"|६६

The units are added as a column header:

	kilograms	pounds	stone and pounds
|disp=table	१०	२२	१ स्टोन ८ पाउन्ड
|disp=table and |abbr=on	२० किग्रा	४४ पाउन्ड	३ स्टोन २ पाउन्ड
|disp=table and |abbr=off	३० किलोग्राम	६६ पाउन्ड	४ स्टोन १० पाउन्ड
|disp=tablecen	४०	८८	६ स्टोन ४ पाउन्ड
|disp=<other> (default)	५० किलोग्राम (११० पाउन्ड; ७ स्टोन १२ पाउन्ड)

Sorting

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{convert|10|m|ft|sortable=on}} → <span data-sort-value="7001100000000000000♠"></span>10 metres (33 ft)

showing: १० मिटर (३३ फिट).

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

	m	m	ft
A	१५.७५मी	१५+३⁄४	५२
B	१५.५मी	१५.५	५१
C	१६मी	१६.०	५२.५
D	१६मी	१६	५२

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

Units

The conversion factors and physical constants are sourced here.

All units

See also: Template:Convert/list of units

Units are case-sensitive: use kW, not KW or kw

Abridged list of units supported by {{Convert}}
Explanation
system	unit	unit- code	symbol or abbrev.	notes	conversion factor	combination output units
the system(s) to which the unit belongs	units listed by name	unit-code to use in template	symbols shown in output	other notes about the units	conversion factors used to convert to and from the SI base unit	output codes for multiple conversions
LENGTH (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/m	combination output units
SI	megametre	Mm	Mm	US spelling: megameter	१,०००,०००
	किलोमिटर	km	किमी	US spelling: kilometer	१,०००	km mi
	मीटर	m	मी	US spelling: meter	१	m ft m ftin
	centimetre	cm	सेन्टीमिटर	US spelling: centimeter	०.०१	cm in
	millimetre	mm	मीमी	US spelling: millimeter	०.००१	mm in
	micrometre	μm (um)	µm	US spelling: micrometer	०.०००००१
	nanometre	nm	nm	US spelling: nanometer	०.००००००००१
non-SI metric	ångström	Å (angstrom)	Å		०.०००००००००१
Imperial & US customary	mile	mi	मी		१,६०९.३४४	mi km
	furlong	furlong			२०१.१६८
	chain	chain			२०.११६८
	rod	rd	rd	For other names of this unit see the full list.	५.०२९२
	fathom	fathom		assumes 1 fathom ≡ 6 ft	१.८२८८
	yard	yd	yd	assumes the international definition	०.९१४४
	foot	ft (foot)	फिट	Code "foot" will show "foot" if plural.	०.३०४८	ft m (foot m) hand  ( ERROR {Convert}: Invalid parameters: 1=floor(hand)+(hand*10)mod10/4 2=( floor(hand)+(hand*10)mod10/4 )*0.1016 3=0 4= 5= 6= with {u}= n= .              Try using range: {{convert|floor(hand)+(hand*10)mod10/4 |( floor(hand)+(hand*10)mod10/4 )*0.1016|0...}} to convert a range of numbers.)
	inch	in	इन्च		०.०२५४	in cm in mm
	Other	nautical mile	nmi	nmi	the international standard nautical mile For other nautical miles see the full list.	१,८५२
parsec		pc	pc		३.०८५६७७५८१४६७२000×10^16
light-year		ly	ly		९.४६०७३०४७२५८०८×10^15
खगोलीय एकाइ		AU	AU		१४९,५९७,८७०,७००
AREA (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/m2	combinations
SI	square kilometre	km2	किमी२	US spelling: square kilometer	१,०००,०००	km2 sqmi
	square metre	m2	m2	US spelling: square meter	१	m2 sqft
	square centimetre	cm2	cm2	US spelling: square centimeter	०.०००१	cm2 sqin
	square millimetre	mm2	mm²	US spelling: square millimeter	०.०००००१	mm2 sqin
non-SI metric	hectare	ha	हेक्टर		१०,०००
Imperial & US customary	square mile	sqmi	वर्ग मी		२,५८९,९८८.११०३३६	sqmi km2
	एकर	acre			४,०४६.८५६४२२
	square yard	sqyd	sq yd		०.८३६१२७३६
	square foot	sqft (sqfoot)	sq ft	Code "sqfoot" will show "square foot" if plural.	०.०९२९०३०४	sqft m2 (sqfoot m2)
	square inch	sqin	sq in		०.०००६४५१६	sqin cm2
Other	square nautical mile	sqnmi	sq nmi		३,४२९,९०४
	dunam	dunam		For alternative spellings and definitions see the full list	१,०००
	tsubo	tsubo			(४००/१२१)
VOLUME (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/m3	combinations
SI	cubic metre	m3	m3	US spelling: cubic meter one kilolitre	१
	cubic centimetre	cm3	cm3	US spelling: cubic centimeter one millilitre	०.०००००१
		cc	cc
	cubic millimetre	mm3	mm³	US spelling: cubic millimeter	०.००००००००१
non-SI metric	kilolitre	kl	kl	US spelling: kiloliter one cubic metre	१
		kL	kL
	litre	l	l	US spelling: liter one cubic decimetre Allows triple output units. See: full list.	०.००१	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L	L			L impgal L USgal L U.S.gal L USdrygal L U.S.drygal
	centilitre	cl	cl	US spelling: centiliter	०.००००१
		cL	cL
	millilitre	ml	ml	US spelling: milliliter one cubic centimetre	०.०००००१	ml impoz ml USoz ml U.S.oz
		mL	mL			mL impoz mL USoz mL U.S.oz
Imperial & US customary	cubic yard	cuyd	cu yd		०.७६४५५४८५७९८४
	cubic foot	cuft (cufoot)	cu ft	Code "cufoot" will show "cubic foot" if plural.	०.०२८३१६८४६५९२
	cubic inch	cuin	cu in		०.००००१६३८७०६४
Imperial	barrel	impbbl	imp bbl	36 imp gal	०.१६३६५९२४
	bushel	impbsh	imp bsh	8 imp gal	०.०३६३६८७२
		impbu	imp bu
	gallon	impgal	imp gal	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list.	०.००४५४६०९	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	quart	impqt	imp qt	1/4 imp gal or 40 imp fl oz	०.००११३६५२२५
	pint	imppt	imp pt	1/8 imp gal or 20 imp fl oz	०.०००५६८२६१२५
	fluid ounce	impoz(impfloz)	imp fl oz	1/160 imp gal	०.००००२८४१३०६२५	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	barrel	USbbl	US bbl	31½ US gal used for liquids except for oil and beer (see the full list)	०.११९२४०४७११९६
		U.S.bbl	bbl
	barrel	oilbbl	bbl	42 US gal	०.१५८९८७२९४९२८
	beer barrel	USbeerbbl (usbeerbbl)	US bbl		०.११७३४७७६५३०४
		U.S.beerbbl (usbeerbbl)	U.S. bbl
	gallon	USgal	US gal	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list.	०.००३७८५४११७८४	USgal l USgal L USgal impgal
		U.S.gal	U.S. gal			USgal l USgal L USgal impgal
	quart	USqt	US qt	1/4 US gal or 32 US fl oz	०.०००९४६३५२९४६
		U.S.qt	U.S. qt
	pint	USpt	US pt	1/8 US gal or 16 US fl oz	०.०००४७३१७६४७३
		U.S.pt	U.S. pt
	fluid ounce	USoz (USfloz)	US fl oz	1/128 US gal	०.००००२९५७३५२९५६२५	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)	U.S. fl oz			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	barrel	USdrybbl	US bbl	105/32 US bsh	०.११५६२८१९८९८५०८
		U.S.drybbl	U.S. bbl
	bushel	USbsh	US bsh	2150.42 cubic inches by definition	०.०३५२३९०७०१६६८८
		USbu	U.S. bu
		U.S.bsh	U.S. bsh
		U.S.bu	U.S. bu
	dry gallon	USdrygal	US dry gal	1/8 US bsh Allows triple output units. See: full list.	०.००४४०४८८३७७०८६	USdrygal l USdrygal L USdrygal impgal
		U.S.drygal	U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	dry quart	USdryqt	US dry qt	1/32 US bsh	०.००११०१२२०९४२७१५
		U.S.dryqt	U.S. dry qt
	dry pint	USdrypt	US dry pt	1/32 US bsh	०.०००५५०६१०४७१३५७५
		U.S.drypt	U.S. dry pt
SPEED (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/(m/s)	combinations
SI	metre per second	m/s	m/s	US spelling: meter per second	१	m/s ft/s (m/s foot/s)
non-SI metric	kilometre per hour	km/h	किमी/घण्टा	US spelling: kilometer per hour	(५/१८)	km/h mph
Imperial & US customary	mile per hour	mph	mph		०.४४७०४	mph km/h mph kn
	foot per second	ft/s (foot/s)	ft/s	Code "foot/s" will show "foot per second" if plural.	०.३०४८	ft/s m/s
Maritime units	knot	kn (knot)	kn		(४.६३/९)	kn mph
FORCE (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/N	combination output units
SI	giganewton	GN	GN	Allows triple output units. See: full list.	१,०००,०००,०००	GN LT-f GN LTf GN ST-f GN STf
	meganewton	MN	MN	Allows triple output units. See: full list.	१,०००,०००	MN LT-f MN LTf MN ST-f MN STf
	kilonewton	kN	kN	Allows triple output units. See: full list.	१,०००	kN LT-f kN LTf kN ST-f kN STf
	newton	N	N		१	N lb-f N lbf N oz-f N ozf
	millinewton	mN	mN		०.००१	mN oz-f mN ozf mN gr-f mN grf
	micronewton	μN (uN)	µN		०.०००००१	μN gr-f μN grf
	nanonewton	nN	nN		०.००००००००१	nN gr-f nN grf
cgs	megadyne	Mdyn	Mdyn		१०
	kilodyne	kdyn	kdyn		०.०१
	dyne	dyn (dyne)	dyn		०.००००१
	millidyne	mdyn	mdyn		०.०००००००१
Metric gravitational units	tonne-force	t-f	tf		९,८०६.६५
		tf	tf
	kilogram-force	kg-f	kgf		९.८०६६५
		kgf	kgf
	gram-force	g-f	gf		०.००९८०६६५
		gf	gf
	milligram-force	mg-f	mgf		०.०००००९८०६६५
		mgf	mgf
Avoirdupois-based units	poundal	pdl	pdl		०.१३८२५४९५४३७६
	long ton-force	LT-f	LTf		९,९६४.०१६४१८१८३५२	LT-f ST-f
		LTf	LTf			LTf STf
	short ton-force	ST-f	STf		८,८९६.४४३२३०५२१	ST-f LT-f
		STf	STf			STf LTf
	pound-force	lb-f	lbf		४.४४८२२१६१५२६०५
		lbf	lbf
	grain-force	gr-f	grf		०.०००६३५४६०२३०७५१५
		grf	grf
ENERGY (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/J	combinations
SI	gigajoule	GJ	GJ		१,०००,०००,०००
	megajoule	MJ	MJ		१,०००,०००
	kilojoule	kJ	किजु		१,०००
	hectojoule	hJ	hJ		१००
	decajoule	daJ	daJ		१०
	joule	J	J		१
	decijoule	dJ	dJ		०.१
	centijoule	cJ	cJ		०.०१
	millijoule	mJ	mJ		०.००१
	microjoule	μJ (uJ)	µJ		०.०००००१
	nanojoule	nJ	nJ		०.००००००००१
cgs	megaerg	Merg	Merg		०.१
	kiloerg	kerg	kerg		०.०००१
	erg	erg	erg		०.००००००१
Watt-hour multiples	terawatt-hour	TWh	TWh		३.६×10^15
		TW.h	TW·h
	gigawatt-hour	GWh	GWh		३.६×10^12
		GW.h	GW·h
	megawatt-hour	MWh	MWh		३,६००,०००,०००
		MW.h	MW·h
	kilowatt-hour	kWh	kWh		३,६००,०००
		kW.h	kW·h
	watt-hour	Wh	Wh		३,६००
		W.h	डब्ल्यु.एच
Electron- volt multiples
	gigaelectronvolt	GeV	GeV		०.०००००००००१६०२१७६४८७
	megaelectronvolt	MeV	MeV		१.६०२१७६४८७×10^−13
	kiloelectronvolt	keV	keV		१.६०२१७६४८७×10^−16
	electronvolt	eV	eV		१.६०२१७६४८७×10^−19
	millielectronvolt	meV	meV		१.६०२१७६४८७×10^−22
Calorie multiples	calorie	Cal	Cal	The thermo-chemical calorie is the default definition. For others, see the full list.	४,१८४
	megacalorie	Mcal	Mcal		४,१८४,०००
	kilocalorie	kcal	kcal		४,१८४
	calorie	cal	cal		४.१८४
	millicalorie	mcal	mcal		०.००४१८४
pound/ ounce-foot/ inch-hour-minute-second	foot-poundal	ftpdl	ft·pdl		०.०४२१४०११००९३८०४८
	foot-pound (energy)	ftlbf	ft·lbf		१.३५५८१७९४८३३१४००३
		ftlb-f	ft·lbf
	inch-pound force	inlbf	in·lbf		०.११२९८४८२९०२७६१६७
		inlb-f	in·lbf
	inch-ounce force	inozf	in·ozf		०.००७०६१५५१८१४२२६०४३५०
		inoz-f	in·ozf
	horsepower-hour	hph	hp·h		2,684,519.537696172792
British thermal unit	British thermal unit	Btu	Btu	The International Steam Table British thermal unit is used. For others, see the full list.	१,०५५.०५५८५२६२
		BTU	BTU
TNT-based units	gigatonne of TNT	GtTNT			४.१८४×10^18
	gigaton of TNT	GtonTNT
	megatonne of TNT	MtTNT			४.१८४×10^15
	megaton of TNT	MtonTNT	Mt
	kilotonne of TNT	ktTNT			४.१८४×10^12
	kiloton of TNT	ktonTNT	kt
	tonne of TNT	tTNT			४,१८४,०००,०००
	ton of TNT	tonTNT
Other
	Hartree	Eh	Eh		४.३५९७४४१७×10^−18
	rydberg	Ry	Ry		२.१७९८७४१×10^−18
	tonne of oil equivalent	toe	toe		४१,८६८,०००,०००
	barrel of oil equivalent	BOE	BOE		६,११७,८६३,२००
	cubic foot of natural gas	cuftnaturalgas (cufootnaturalgas)		Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural.	1,055,055.85262
	litre-atmosphere	latm	l·atm		१०१.३२५
		Latm	L·atm
	gallon-atmosphere	impgalatm	imp gal·atm		४६०.६३२५६९२५
	gallon-atmosphere	USgalatm (usgalatm)	US gal·atm		३८३.५५६८४९०१३८
		U.S.galatm (usgalatm)	U.S. gal·atm
TEMPERATURE (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion to kelvin	combinations
SI	kelvin	K	K	Allows triple output units. See: full list.	[K]	K °C (K C) K °R (K R) K °F (K F)
	degree सेल्सियस	°C (C)	°से		([°C]+273.15)	°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary	degree Rankine	°R (R)	°R		([°R]/1.8)	°R K (R K) °R °C (R C) °R °F (R F)
	degree फेहरनहाइट	°F (F)	°फे		(([°F]+459.67)/1.8)	°F K (F K) °F °C (F C) °F °R (F R)
	Celsius change	C-change		Example:  {{convert|5|C-change}}
	Fahrenheit change	F-change		Example:  {{convert|10|F-change}}
MASS (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/kg	combination output units
SI	kilogram	kg	किलोग्राम	Allows triple output units. See: full list.	१	kg lb kg st
	gram	g	ग्राम		०.००१	g oz
	milligram	mg	mg		०.०००००१	mg gr
	microgram	μg (ug)	µg		०.००००००००१
non-SI metric	tonne	t	t	Allows triple output units. See: full list.	१,०००	t LT t ST
	metric ton	MT	t			MT LT MT ST
Avoirdupois	long ton	LT		2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list.	१,०१६.०४६९०८८	LT t LT MT LT ST
		long ton
	short ton	ST		2,000 lb used mostly in the US. Allows triple output units. See: full list.	९०७.१८४७४	ST t ST MT ST LT
		short ton
	stone	st	st	14 lb used mostly in the British Commonwealth except Canada. Allows triple output units. See: full list.	६.३५०२९३१८	st kg st lb
	pound	lb	पाउण्ड	Allows triple output units. See: full list.	०.४५३५९२३७	lb kg lb st
	ounce	oz	oz		०.०२८३४९५२३	oz g
	drachm	drachm			०.००१७७१८४५१९५
	drachm	dram
	grain	gr	gr	equivalent to the troy grain	०.००००६४७९८९१
Troy	troy ounce	ozt	ozt		०.०३११०३४७६८
other	carat	carat			०.०००२
TORQUE (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/N·m	combinations
Industrial
SI	newton metre	Nm	N·m	Triple combinations are also possible. See the full list.	1	Nm kg-m Nm ft-lb
Non-SI metric	kilogram-meter	kg-m	kg-m		9.80665	kg-m Nm kg-m ft-lb
Imperial & US customary	foot-pound	ft-lb	ft-lb		1.3558	ft-lb Nm ft-lb kg-m
Scientific
SI	newton metre	N-m	N·m	Triple combinations are also possible. See the full list.	1	N-m kgf-m N-m lbf-ft
Non-SI metric	kilogram-force meter	kgf-m	kgf·m		9.80665	kgf-m N-m kgf-m lbf-ft
Imperial & US customary	pound-foot	lbf-ft	lbf·ft		1.3558	lbf-ft N-m lbf-ft kgf-m
PRESSURE
	unit	unit- code	abbrev- iation		conversion factor/Pa
	gigapascal	GPa	GPa		१,०००,०००,०००	‎
	megapascal	MPa	MPa		१,०००,०००	‎
	kilopascal	kPa	kPa		१,०००	‎
	hectopascal	hPa	hPa		१००	‎
	pascal	Pa	Pa		१	‎
	millipascal	‎mPa‎	mPa		०.००१	‎
	millibar	mbar	mbar		१००	‎
		mb	mb			‎
	decibar	‎dbar	dbar		१०,०००	‎
	bar	bar	bar		१००,०००	‎
	kilobarye	kBa	kBa		१००	‎
	barye	‎Ba	Ba		०.१	‎
	standard atmosphere	atm	atm		१०१,३२५	‎
	torr	Torr	Torr		(२०,२६५/१५२)	‎
	millimetre of mercury	mmHg	mmHg		१३३.३२२३८७४१५	‎
	inch of mercury	inHg	inHg		३,३८६.३८८६४०३४१	‎
	pound per square inch	psi	psi		(444,822,161.52605 / 64,516)
FUEL EFFICIENCY
	unit	unit- code		notes		combinations
	kilometres per litre	km/l (km/L)		Use km/L to get "km/L"		km/l mpgimp km/l mpgus
	litres per 100 kilometres	l/100 km (L/100 km)		Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
	litres per kilometre	l/km (L/km)		Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
	miles per imperial gallon	mpgimp				mpgimp mpgus
	miles per US gallon	mpgus (mpgUS, mpgU.S.)		Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
	imperial gallons per mile	impgal/mi				impgal/mi
	US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)		As above with the us vs US vs U.S.		usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POWER
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lower case hp for horsepower, for example)
POPULATION DENSITY
	unit	unit- code		notes		combinations
	inhabitants per square kilometre	PD/sqkm		PD stands for population density, i.e. humans (inhabitants)		PD/sqkm PD/sqmi
	per square kilometre	/sqkm		Used when the word 'inhabitants' would be inappropriate.		/sqkm /sqmi
	inhabitants per hectare	PD/ha				PD/ha PD/acre
	per hectare	/ha				/ha /acre
	inhabitants per square mile	PD/sqmi		PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/sqkm
	per square mile	/sqmi		Used when the word 'inhabitants' would be inappropriate.		/sqmi /sqkm
	inhabitants per acre	PD/acre				PD/acre PD/ha
	per acre	/acre				/acre /ha
COST PER UNIT MASS
	unit	unit- code		notes		combinations
	dollars per pound	$/lb		"$" can mean US$, HK$, etc.		(none)
	dollars per kilogram	$/kg				(none)
	dollars per troy ounce	$/ozt		12 troy ounces in 1 troy pound		(none)

'per' units: kg/ha, miles per gallon

When using a slash (/), a unit like kg/ha is recognized as kilograms per hectare and will be converted in to other mass/area units. A unit in the numerator is not required.

• {{convert|1000|kg/ha}} → १,००० किलोग्राम प्रति हेक्टर (८९० पाउन्ड/एकड)
• {{convert|350|/in2}} → ३५० per square inch (५४/cm²)

Population density (inhabitants per square mile) can be converted using

• {{convert|10|PD/sqmi|PD/km2}} → १० निवासी प्रति वर्ग माइल (३.९/किमी²)

Vehicular fuel efficiency, commonly expressed in miles per gallon or litres per 100 km can also be converted

• {{convert|26|mpgUS|l/100km mpgimp}} → २६ माइल प्रति अमेरिकी ग्यालन (०.००९० लि/100 किमी; ३१ माइल/इम्प॰ गैल॰)

Units of difference: Expressing a change or difference in temperature

We have already discussed standard temperature conversions (°C, °F, K), as shown in these two examples:

• {{convert|10|C}} → १० °से (५० °फे) (standard temperature conversion)
• {{convert|10|-|15|C}} → १०–१५ °से (५०–५९ °फे) (standard temperature range conversion)

When expressing a temperature change (e.g., "The temperature increased by 10 °C"), or when comparing temperatures (e.g., "10 to 15 °C warmer"), we cannot use the standard temperature units (|C, |F and |K), which refer to points on the respective scale. Instead, we must use one of the following "units of difference": |C-change, |F-change and |K-change.

Compare the following two examples with the two above:

• {{convert|10|C-change}} → १० °से (१८ °फे) increase in temperature
• {{convert|10|-|15|C-change}} → १०–१५ °से (१८–२७ °फे) warmer than normal

To produce multiple units in the output:

• {{convert|10|C-change|F-change K-change}} → १० °से (१८ °फे; १० के) difference

Multiple units: 1 ft 5 in

In input

Base document § Input multiples lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

• {{convert|1|yd|2|ft|3|in}} → १ गज २ फिट ३ इन्च (१.६० मी)
• {{convert|2|ft|3|in|cm}} → २ फिट ३ इन्च (६९ सेमी)
• {{convert|1|lb|5|oz|g}} → १ पाउन्ड ५ औंस (६०० ग्रा)

In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at § Output multiples.

• {{convert|2|m|ftin}} → २ मिटर (६ फिट ७ इन्च)
• {{convert|2|m|ft in}} → २ मिटर (६.६ फिट; ७९ इन्च), using a space, returns the decimal point

Default behavior, for comparison:

• {{convert|2|m}} → २ मिटर (६ फिट ७ इन्च)

See also:

• {{hands}} a length used to measure horses
• {{Long ton}} a weight in ton, cwt, qr and lb

Currency per unit: $/mi → $/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

• {{convert|3.39|$/USgal|$/L}} →
• {{convert|10000|€/ha|€/acre}} →
• {{convert|10|¢/mi|¢/km}} → १० ¢/mi
• {{convert|1500|¥/lb|¥/kg}} →

You can also set the currency in both values using |$=€:

• {{convert|10|$/mi|$/km|$=€}} → €१० प्रति माइल (€६.२/किमी)

It is not possible to convert the currency:

• {{convert|10|$/lb|€/kg}} → N

So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km) N

Using convert inside templates

For usage in template code, like infoboxes, {{Convert}} has these options:

Pre-formatting fraction input

• Module:Convert/helper can read regular input and pre-format it into {{Convert}}-accepted input. Note this function does not have the full capabilities of the Convert template; it only converts fractions (and horse race distances)

Your template can accept |input=16 7/8 and use {{#invoke:Convert/helper|number|16 7/8}} → 16+7/8

Using a Wikidata property

• Adding the Wikidata property code, like code |input=P2073, to your template code automatically returns the Wikidata property for that article, and convert it. Both number and unit are read.

Note: to return that property value for an other article, use |qid=.

Example for vehicle range (P2073) of [[d:Special:EntityPage/Qढाँचा:Get QID| (Qढाँचा:Get QID)]]:

• {{convert|input=P2073|qid={{get QID|Cessna 208 Caravan}}|ftin|abbr=on}} →
• {{convert|input=P2073|qid=Q1056131|km|abbr=on}} →
• {{convert|input=P2073|qid=Q1056131|km|abbr=on|disp=out}} →

For example see Template:Infobox telescope.

Sometimes a property may have more than one value against it in Wikidata. You can use the |qual= parameter to specify which of the values you want to use.

Example for diameter (P2386): Note: this example uses |qid=Q1513315 (testing for South Pole Telescope (Q1513315))

• primary mirror (Q613628): {{convert|input=P2386|qual=Q613628|ft|abbr=on}} → १०.० मी (३२.८ फिट)
• secondary mirror (Q1395645): {{convert|input=P2386|qual=Q1395645|ft|abbr=on}} → १ मी (३.३ फिट)

Parameter list

Deprecated options

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Convert in articles based on its TemplateData.

TemplateData for Convert

Converts measurements to other units.

ढाँचा प्यारामिटरहरू[ढाँचा डाटा सम्पादन गर्नुहोस्]

This template prefers inline formatting of parameters.

मापदण्ड		विवरण	प्रकार	स्थिति
Value	1	The value to convert.	सङ्ख्या	आवश्यक
From unit	2	The unit for the provided value. प्रस्तावित मानहरू km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K C F m3 cm3 mm3 L mL cuft cuin U.S.gal U.S.oz psi mpgU.S. $/lb $/kg उदाहरण km	String	आवश्यक
To units	3	The units to convert into. Separate units by a space for multiple outputs. In an output unit, use + for a multiplication space. प्रस्तावित मानहरू km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K C F m3 cm3 mm3 L mL cuft cuin U.S.gal U.S.oz psi mpgU.S. $/lb $/kg उदाहरण mi nmi	String	सुझावित
Precision or suffix	4	Significant digits after decimal dot or, if negative, exponent of ten.	सङ्ख्या	वैकल्पिक
Link units	lk	Indication of what units to apply wikilinks to. Use “on” for all, “in” for the input unit, “out” for the output units, or “off” for none of the units. For more fine-grained control over which units to link, use the template multiple times. प्रस्तावित मानहरू in out on off पूर्वनिर्धारित off उदाहरण on	String	वैकल्पिक
Abbreviation	abbr	Display for the units: “on” to display all units using their unit symbols, “off” to display all units in full words, “in” to display the unit symbol for the input unit, “out” to display the unit symbols for the output units, “unit” to display unit symbols for both input and output units when using scientific notation, “values” for no units at all (neither unit symbols nor full words of units). प्रस्तावित मानहरू in off none on out unit values ~ पूर्वनिर्धारित out उदाहरण on, unit, in, out, off	String	सुझावित
Spelling	sp	Spelling of units. Use “us” to display unit names using U.S. spelling. उदाहरण us	String	वैकल्पिक
Adjective	adj	Whether to use adjectival form. Use “on” for singular unit name appended by a hyphen, “mid” to put conversion at end, or “off” (default) for no adjectival form. प्रस्तावित मानहरू mid on pre ri0 ri1 ri2 ri3 off पूर्वनिर्धारित off उदाहरण on	Unbalanced wikitext	वैकल्पिक
Conversion	disp	Display conversion result: “or”: after ‘or’, “x”: with custom prefix and suffix, “b”: in parentheses, “table”/“tablecen”, “output only”: alone, “output number only”: alone and without unit, “unit”: not at all but input unit; if the value is a number it is used as precision. प्रस्तावित मानहरू b sqbr br comma semicolon or number output number only out output only preunit table tablecen unit unit2 x उदाहरण b	String	वैकल्पिक
Ordering	order	“flip” returns converted value first, input value second. प्रस्तावित मानहरू flip out उदाहरण flip	String	वैकल्पिक
Significant figures	sigfig	Indicates the number of significant figures to be used in rounding.	सङ्ख्या	वैकल्पिक
Rounding output	round	The type of rounding. “5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range.	सङ्ख्या	वैकल्पिक
Thousands separator	comma	Sets or suppresses the use of thousands separators in the numbers. “off”: no separator; “gaps”: use space instead of comma as thousands separator; “5”: only add thousands separator when the integral part of the number uses 5 positions or more (10,000 or more; if using comma as thousands separator, 1234 would produce '1234', 12345 would produce '12,345'). पूर्वनिर्धारित on उदाहरण off	बुलियन	वैकल्पिक
Sort key	sortable	“on” generates a hidden sort key उदाहरण on	बुलियन	वैकल्पिक
Spell numbers?	spell	If used, spells input or input and output numbers in words, optionally capitalizing the first प्रस्तावित मानहरू in In on On उदाहरण 'in', 'In', 'on', or 'On'	String	वैकल्पिक
Singular?	sing	If 'yes', uses singular form of units (deprecated) उदाहरण yes	बुलियन	बहिष्कृत
Fraction?	frac	fraction as rounding unit	सङ्ख्या	वैकल्पिक
Currency symbol	$	sets currency symbol in both units उदाहरण $=€ will show " €10 per mile (€6.2/km)"	String	वैकल्पिक
Mach altitude (ft)	altitude_ft	Mach (speed) depends on altitude प्रस्तावित मानहरू 10000	सङ्ख्या	वैकल्पिक
Mach altitude (m)	altitude_m	Mach (speed) depends on altitude	सङ्ख्या	वैकल्पिक
WD property	input	Reads the property value of the item (article), then converts it उदाहरण {{convert|input=P2046}} (P2046=area)	String	वैकल्पिक

See also

• {{Cvt}}
• {{Inflation}}, for converting historical prices to their current equivalent
• {{SI units}}
• {{To USD}}, for currency conversions

माथिको कागजात ढाँचा:Convert/कागजातबाट समावेश गरिएको छ। (सम्पादन गर्नुहोस् | इतिहास)
सम्पादकहरूले यस ढाँचाको प्रयोगस्थल (सिर्जना गर्नुहोस् | नक्कल गर्नुहोस्) र परीक्षण (सिर्जना गर्नुहोस्) पृष्ठहरूमा प्रयोग गर्न सक्छन्।
/कागजात उपपृष्ठमा श्रेणीहरू थप्नुहोस्। यस ढाँचाका उपपृष्ठहरू।