ढाँचा:Ft to m
ढाँचा कागजात[हेर्नुहोस्] [सम्पादन गर्नुहोस्] [इतिहास] [ताजा गर्नुहोस्] | यस ढाँचामा अप्ठ्यारा सुविधाहरू रहेका छन्। कृपया यस ढाँचालाई सम्पादन गर्नु पूर्व यस ढाँचाको व्यवस्थापन तथा पार्सर प्रणालीहरूसँग परिचित हुनुपर्छ र पनि यदि तपाईँले गरेको सम्पादनबाट कुनै जटिल तथा अप्रत्याशित समस्या आएमा तत्कालै आफ्नो सम्पादन फर्काई दिनुहोला, किनकि यो ढाँचा अत्यधिक सङ्ख्याका लेख/पृष्ठहरूमा प्रयोग भइरहेको छ। स्मरण रहोस्: तपाईँ प्रयोग आदि गर्न सक्नुहुन्छ तर यहाँ कुनै पनि प्रयोग गर्नुपूर्व सबै प्रयोग सामान्य ढाँचा प्रयोगस्थलमा अथवा आफ्नो प्रयोगकर्ता प्रयोगस्थलमा गर्नुहोस्। |
This template is intended to perform foot-to-meter conversions. It converts single values, ranges, as well as two- and three-dimensional measurements.
Accepted parameters[सम्पादन गर्नुहोस्]
Italicized parameters are optional:
- num, or l (length), or from, or first unnamed parameter is a required parameter, which specifies the number of feet to be converted to meters (for single value conversions), or length (for two- and three-dimensional conversions), or start of range (for range conversions). Please do not format this parameter; i.e., use 1234 instead of 1,234.
- w (width), or to, or second unnamed parameter is a parameter specifying width (for dimensional conversions) or end of range (for range conversions) in feet to be converted to meters. Please do not format this parameter; i.e., use 1234 instead of 1,234.
- h (height) or third unnamed parameter is a parameter specifying height (for three-dimensional conversions) in feet to be converted to meters. Please do not format this parameter; i.e., use 1234 instead of 1,234.
- convtype (conversion type) can take values of either range or dim. Range is only meaningful when two values are supplied for conversion. The default value is dim.
- abbr can take values of either mos, yes, or no. Mos will show the names of the units as specified in the Manual of Style for dates and numbers (feet, m); yes will show the abbreviated names of the units (ft, m); and no will show the full names of the units (feet, meters). With dimensional conversions, all values will be separated with the "by" preposition when the parameter is set to no, and with the "×" sign when the parameter is set to yes. When the parameter is set to mos, feet values will be separated with the "by" preposition, and the converted values in meters—with the "×" sign. The default value is mos.
- spell can take values of Commonwealth, Com, C, BrE or UK. For any of these values the spelling metre(s) will be used. The default spelling is meter(s). This is only meaningful when abbr is set to no.
- precision is the number of decimal digits in the converted value. Defaulting to conversions to the most precise of the following.
- conversions rounded down one decimal place as compared to the input value
- note: Where a range is given the most precise of the inputs is used.
- note: One square meter is of comparable size to ten square feet.
- conversions rounded down one decimal place as compared to the input value
- or
- conversions rounded to two significant figures
- sigfig specifies the number of significant figures in the converted value.
- This overrides precision.
- Where the conversion is of a range it is the number of significant figures in the first value which is specified with the second being rounded to the same level of precision.
- max precision specifies the maximum precision to round to.
- min precision specifies the minimum precision to round to.
- wiki specifies whether the names of the units should be wikified or not and can take values of either yes or no. The default value is no.
Capitalization of the parameters is unimportant.
Usage and examples[सम्पादन गर्नुहोस्]
Single value conversion[सम्पादन गर्नुहोस्]
- Usage
- {{ft to m | num | abbr | spell | precision | wiki}}
- Examples
- Manual of Style notation: {{ft to m|100}} → ढाँचा:Ft to m/ID
- Short notation: {{ft to m|100|abbr=yes}} → ढाँचा:Ft to m/ID
- Full notation: {{ft to m|num=100|abbr=no|spell=Commonwealth|precision=2|wiki=yes}} → ढाँचा:Ft to m/ID
Range conversions[सम्पादन गर्नुहोस्]
- Usage
- {{ft to m | from | to | convtype | abbr | spell | precision | wiki}}
- Examples
- Manual of Style notation: {{ft to m|100|200|convtype=range}} → ढाँचा:Ft to m/range
- Short notation: {{ft to m|100|200|convtype=range|abbr=yes}} → ढाँचा:Ft to m/range
- Full notation: {{ft to m|from=100|to=200|convtype=range|abbr=no|spell=Commonwealth|precision=2|wiki=yes}} → ढाँचा:Ft to m/range
Two-dimensional conversions[सम्पादन गर्नुहोस्]
- Usage
- {{ft to m | l | w | convtype | abbr | spell | precision | wiki}}
- Examples
- Manual of Style notation: {{ft to m|100|200}} → ढाँचा:Ft to m/IID
- Short notation: {{ft to m|100|200|abbr=yes}} → ढाँचा:Ft to m/IID
- Full notation: {{ft to m|l=100|w=200|convtype=dim|abbr=no|spell=Commonwealth|precision=2|wiki=yes}} → ढाँचा:Ft to m/IID
Three-dimensional conversions[सम्पादन गर्नुहोस्]
- Usage
- {{ft to m | l | w | h | convtype | abbr | spell | precision | wiki}}
- Examples
- Manual of Style notation: {{ft to m|1|2|3}} → ढाँचा:Ft to m/IIID
- Short notation: {{ft to m|1|2|3|abbr=yes}} → ढाँचा:Ft to m/IIID
- Full notation: {{ft to m|l=1|w=2|h=3|convtype=dim|abbr=no|spell=Commonwealth|precision=2|wiki=yes}} → ढाँचा:Ft to m/IIID
See also[सम्पादन गर्नुहोस्]
- {{convert}}
- {{m to ft}}
- {{ft in to m}}
- {{m to ft in}}